T1 Pricing And Speed
There are businesses and people that are looking for a fast internet connection. If this is the case for you, you should know that a T1 connection with VOIP or a T3 connection is a great way to have internet speed. Voice requirements being met today by T1 circuits will decrease with wider adoption of VoIP and data rates of 3 Mbps to 10 Mbps provide quite a lot of headroom compared to today's 300 kbps to 1.5 Mbps rates.
A data rate would be 10 Mbps, which would be compatible with the very low cost and well-accepted Ethernet standard and represent a three- to six-times improvement for the majority of enterprise sites. The 10-Mbps rate, furthermore, need not be tied necessarily to Ethernet services. This bandwidth, flexibly provisioned without truck rolls, also would overcome both enterprise and carrier market constraints.
Keep in mind that these vendors' solutions are especially attractive as an upgrade to existing T1 circuits because the necessary clean copper pairs will already be in place. All that's needed is to connect the relative inexpensive terminal equipment onto each end of the existing four-wire circuits.
This approach is also a weakness in that such point-to-point solutions do not fit well into large ILEC loop architectures that are built around aggressive deployment of DSLAM and DLC equipment. They also lack the elaborate
Pricing for new T1s is well below the prices of existing contracts. A proactive move by the carrier may result in a revenue drop or loss of the account to a competitor. The cost and operational complexity associated with T1 moves, adds and changes are additional factors weighing on carrier T1 marketing strategies. It takes many Mid-sized enterprise locations remain an extremely attractive opportunity for copper-based access technology, despite recent reports touting plans for massive deployment of fiber in the loop plant.
In T1 services, there has been a heavy dependence on copper-based T1 services, which presents formidable challenges for enterprises and carriers. Enterprises are pretty much locked in to their existing services. No price discount is offered for adding an additional T1 line and service provisioning involves starting from scratch to find suitable copper pairs, site surveys, contract negotiations and purchase of new CPE. The benefit of adding a T1 line, consequently, is outweighed by high procurement cost and complexity.
This is so because, relative to residential or large enterprise locations, bandwidth needs at mid-sized locations are modest and existing access links are primarily T1 leased lines; about eighty percent of ILEC enterprise data communications revenue is derived from T1-based services, including T1 private lines and frame relay service. Ninety percent of these T1 lines are delivered on copper. Mid-sized enterprise locations consisting of single site locations of small firms as well as the many smaller sites of major corporations account for most of the T1 leases.
